The Original Wooden Conveyor and Taper Board Feeder

Double Chain Conveyors and Feeders

• 18″ Drive Unit: includes double reduction, adjustable slip clutch, grease able bearings and cast sprockets.
• Wood Conveyor Section: 18″ wide x 9 1/4″ high with 3 coats of polyurethane on surface in contact with feed and painted exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length of 130′
• Wood Taper Board Feeder: 18″ wide x 9 1/4″ high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 150′
• 24″ Drive Unit: includes double reduction, heavy duty adjustable slip clutch, greaseable bearings and cast sprockets
• Wood Conveyor Section: 24″ wide x 9 1/4″ high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails. #62 detachable chain and poly flights. Priced per foot. Maximum length 100′
• Special Top Delivery Conveyor: 6″ high sides above top floor. Priced per foot. 12″ high. #55 or #62 chain with poly flights
• Drive for Special Top Delivery: Motor mount top and bottom

*Conveyor width given is inside measurement.*

Options

• Hopper: Wood construction 25″, 31″ or 37″ wide x 34″ long x 11 1/2″ high
• Incline Hardware: Steel hold-down shoes with poly wear down slides. Maximum 45°

Pre-cut Inclines and Declines

• Decline Sides: 4 poly sides. Field installed
• Drop-out: 12″, 15″ or 18″ wide with side rails. Field installed
• Cover: Stainless steel. Priced per 10′ section. 18″ conveyor or feeder only
• Top Floor: Allows for conveying feed on both upper and lower feeders. Priced per foot
• Section Connecting Irons: Angle irons with bolts, painted blue. Priced per piece
• Flare Board: Required at each hopper, between each hopper and incline. Priced per foot

Single Chain Conveyors

• Drive Unit: Double reduction
• Wood Conveyor Section: 11″ wide with 3 coats of polyurethane on surface in contact with feed and painted exterior. #55 or #62 detachable chain and oak or poly slats. Priced per foot.
• Hopper: Wood construction.
• Cover: Stainless. Priced per 10′ section.